Empty Line

E-Tec Marine Products

Catalog Pages

PIPE (SUPER POLISHED & LITE BRUSHED, SCH. 80)

  • Extruded Brite Dipped Anodized Extrusions:  23' Long (Super Polished Finish or Lite Brushed Finish) . . . Page B-2
  • Chart for Pipe Sizes . . . Page B-3
  • Pipe 1-1/4", 1-1/2" and 2":  Polished or Brushed Finishes (Schedule 80) . . . Page B-3

OVAL EXTRUSIONS & TUBES (POLISHED AND POLISHED & BRUSHED)

  • Oval Extrusions: 20-ft. Long . . . Oval Tubes (Super Polished Finish) . . . Page B-4
  • Oval Extrusions: 20-ft. Long . . . Oval Tubes (Heavy Brushed or Polished Finish) . . . Page B-4
  • Oval Extrusions: 20-ft. Long . . . Oval Tubes with Ribs on One Side (Polished) . . . Page B-5
    • Applications:  Ladder Steps, Diving Platforms.
  • Oval Extrusions: 20-ft. Long . . . Oval Tubes with 2 or 3 Grooves . . . Page B-5
    • Applications:  Swim Platforms, Ladder Rungs, Swim Ladders, etc.
  • Oval Non-Skid Inserts: 12-ft. Long . . . Page B-5

FLAT BAR & TUBING (POLISHED & LITE BRUSHED)

  • Tube:  20-ft. Long . . . Oval with Extruded Non-Skid on Flat Surfaces . . . Page B-6
  • Tube:  20-ft. Long . . . Square with Radius Corners (Polished or Lite Brush Finish) . . . Page B-6
  • Tube:  20-ft. Long . . . Rectangular with Radius Corners (Polished Finish Only) . . . Page B-6
  • Flat Bar: 12-ft. Long . . . Square or Radius - Brite Dipped Clear Anodized (Brushed or Polished) . . . Page B-7

RECTANGULAR TUBING & ANGLES (POLISHED ONLY)

  • Angle:  23-ft. Long . . . Equal Legs (Architectural or Structural) . . . Page B-8
  • Angle:  12-ft. Long . . . J-Moulding . . . Page B-8
  • Special Extrusions . . . Page B-8
  • Extrusions:  Lengths up to 20-ft. in Gold and 23' in Black.
  • Brite Dipped Anodized (All Sizes & Shapes Available, Available in Gold or Weldable Black, 
  • and Polished or Brushed Finish) . . . Page B-9
  • Outrigger Extrusions:  Best Brushed and Polished Outrigger Mounting Extrusion you can buy! . . . Page B-9 

ELECTRONIC BOXES (MULTIPLE STYLES)

  • Electronic Box:  Low Profile . . . Page D-2
  • Electronic Box:  Rectangular Style . . . Page D-2
  • Electronic Box:  Side Mounting High Quality Fiberglass . . . Page D-3
  • Electronic Box - Aluminum Powder Coated with Removable Back
    • Gas Spring Actuators Door Lift . . . Page D-4
    • Radius Lower Edge . . . Page D-4

TOWER CONTROL STATIONS

  • Bay Boat (Ideal for Flat & Bay type Boats) . . . Page D-5
  • 2-Piece - Model 38 (Bucket & Lid are 2 pieces) . . . Page D-5
  • 1-Piece (40" & 50") . . . Page D-6

LEANING POSTS

  • The "Flexor" - A Leaning Post Shock Absorbing Product . . . Page D-7
  • Leaning Post Cushions . . . Page D-8
  • Leaning Post Back Rests . . . Page D-8
  • Leaning Post Tray with Lip . . . Page D-9

DECKS & PLATFORMS

  • Deck:  Non-Skid, 3/16" Thick (Diamond Tread Pattern) . . . Page D-9
  • Poling Platform:  Rectangular Style . . . Page D-9

PADS

  • Pads - Round:  Standard 2 & 3 Hole Mounting (1/4" Thick) . . . Page A-2
  • Pads - Round:  Center Hole Only (1/4" Thick) . . . Page A-3
  • Pads - Round:  4-Hole Mounting (1/4" Thick & 3/8" Thick) . . . Page A-4
  • Pads - Round:  3, 4, 5 Hole with Opening (1/4" & 3/8" Thick) . . . Page A-5
  • Outrigger Pads:  For Hardtops & Canvas Top Frames . . . Page A-6
  • 2-Piece Cover Plates:  Screw Together for Hard Tops . . . Page A-6
  • Pads - Round:  Circular Brushed (1/4" Thick) . . . Page A-7
  • Pads - Rectangular:  2 & 4 Hole Mounting (1/4" Thick) . . . Page A-8
  • Pads - Rectangular Shaped:  Hard Top Style (3/8" Thick) . . . Page A-9
  • Pads - Bow Rail:  "Shaped" (1/4" Thick) . . . Page A-10
  • Pads:  Antenna Ratchet Mounting (1/4" Thick) . . . Page A-10
  • Male Pin to Pad Combination with Female Pin to Pipe . . . Page A-11
  • Female Pin to Pad Combination with Male Pin to Pipe . . . Page A-11
  • Big Pads for Big Pipe "Counter Sunk Holes" . . . Page A-12
  • Big Pads for Big Pipe "Non-Counter Sunk Holes" . . . Page A-13
  • Pads - Teardrop:  Polished or Lite Brushed (1/4" Thick Radius Edge) . . . Page A-14
  • Pads - Diamond:  Polished or Lite Brushed (1/4" Thick Radius Edge) . . . Page A-14
  • Pads - Oval:  Polished or Lite Brushed (1/4" Thick Radius Edge) . . . Page A-15
  • Pads - Heart:  Polished or Lite Brushed (1/4" Thick Radius Edge) . . . Page A-15
  • Pads:  With Ear Weldment Only . . . Page A-19

PINS

  • Pins:  Half . . . Page A-16
  • Pins:  Female Only . . . Page A-16
  • Pins:  Male . . . Page A-17
  • Pins:  Male & Female 1 . . . Page A-17
  • Pins:  Male & Female Combinations . . . Page A-17
  • Pins - Breakaway . . . Page A-18
  • Quick Release Pin Combinations - 90° & 95° Locking Positions . . . Page A-18

MOUNTS & FOOT REST ASSEMBLY

  • Ear:  Mounting . . . Page A-19
  • Hinge Block Assembly with Washers . . . Page A-20
  • Foot Rest Assembly . . . Page A-21
  • Angle Mounts . . . Page A-21
  • Oval Mounts . . . Page A-21

ROD HOLDERS

  • Bay Boat Style Rod Holders . . . Page A-22
  • "Tulip™" Rold Holders (8" LG) . . . Page A-22

ROD HOLDERS (FLUSH MOUNT - POLISHED)

  • 15° & 30°, 1-1/2" I.D. . . . Page A-23
  • 90°, 1-1/2" I.D. . . . Page A-23
  • 10°, 1-1/2" I.D. (Polished or Brushed) . . . Page A-24
  • 10° and 15° Weld-In with 3" x 4" Top Cap . . . Page A-24

 
ROD HOLDER WELD-ONS

  • Rod Holder Weld-On Without Flange: 1-1/2" I.D. (Polished or Brushed) . . . Page A-25
  • Rod Holder Weld-On Without Flange:  1-7/8" I.D. (Polished or Brushed) . . . Page A-25
  • Rod Holder Weld-On - 23°:  1-1/2" I.D. (Polished or Brushed) . . . Page A-26
  • Rod Holder Weld-On - 23°:  1-7/8" I.D. (Polished or Brushed) . . . Page A-26
  • "Tulip™" Rod Holder Weld-On Tulip™:  1-3/4" I.D. (Polished or Brushed) . . . Page A-27
  • Rod Holder Weld-On Tulip™ - 23°:  1-3/4" I.D. (Polished or Brushed) . . . Page A-27
  • "Big Tulip™" Rod Holder Weld-On Tulip™:  1-7/8" I.D. (Polished or Brushed) . . . Page A-28
  • Rod Holder Weld-On Tulip™ - 23°: 1-7/8" I.D. Big Tulip™ with Flange (Polished) . . . Page A-28

"TULIP™" STAINLESS STEEL ROD HOLDERS - WELD-ON

  • 316L SST T-Top Style "Tulip™" (Polished) . . . Page A-29
  • 316L Stainless Steel "Tulip™" . . . Page A-29

ROD HOLDERS - 30°

  • 316 Grade Stainless Steel . . . Page A-29

ROD HOLDER WELD-ONS

  • Rod Holder Weld-On:  T-Top Style (Polished) . . . Page A-30
  • Rod Holder Weld-On with 1-7/8" Oval Flange . . . Page A-31

LINERS FOR ALL ROD HOLDERS

  • Straight, Flared & Tapered, or Flared . . . Page A-32

SLEEVES

  • Leaning Post Back Rest Pipe . . . Page A-32
  • Outside Radius Both Ends (Polished or Lite Brushed) . . . Page A-34

PIVOT ASSEMBLY

  • Back Rest Pivot Assembly:  Low Profile . . . Page A-33
  • Back Rest Pivot Assembly . . . Page A-33

MINI PLATE & MOUNTING ANGLES

  • "Straight" Mounting Angle (Lite Brushed or Polished) . . . Page A-35
  • "Shaped" Mounting Angle - Mini Plate (Lite Brushed) . . . Page A-35

HINGE BRACKETS, ANTENNA MOUNTS & ALIGNMENT PIN SETS

  • Hinge Bracket Set (Lite Sanded:  1/4" and 3/8" Thick) . . . Page A-36
  • Hinge Bracket & Gin Pole Ear (Polished or Lite Brushed) . . . Page A-36
  • Threaded Antenna Mount:  4" Long (Polished or Brite Dipped Anodized) . . . Page A-37
  • Alignment Pin Set for Folding Tower . . . Page A-37

PIPE ALIGNERS, HINGES, HALYARD TIPS AND TOWER SHADE BASE & BOSS

  • Pipe Aligners . . . Page A-38
  • Bimini Hinge with Nylon Washers . . . Page A-38
  • Halyard Tip with Eye End . . . Page A-39
  • Tower Shade Base & Boss Threaded 3/8-16 . . . Page A-39

DOCKING LIGHTS & DECK LAMPS

  • Light "360" by Hella® Marine . . . Page E-2
  • Docking Lights . . . Page E-3
  • Halogen Deck Lamp . . . Page E-3

LED SPREADER LIGHTS & CEILING LIGHTS

  • Scandvik® Bracket & Flush Mount LED Spreader Lights . . . Page E-4
  • Scandvik® Bracket Mount LED Spreader / Flood / Docking Lights . . . Page E-5
  • SeaMaster® Flush Mount Interior & Exterior LED Ceiling Lights (Single or Dual Color) . . . Page E-6

LIQUID LITE™ & LED STRIP LIGHTING

  • Liquid Lite™ Ultra Bright LED Light in Waterproof Housing . . . Page E-7

 
LED RGB MULTI-COLOR ACCENT LIGHTING STRIPS

  • SeaMaster® LED Strip Lighting . . . Pages E-8 thru E-9
  • Scandvik® Scan-Strip LED Lighting . . . Page E-10
  • SeaMaster® LED RGB Multi-Color Accent Lighting Strips with Wi-Fi . . . Pages E-11 thru E-13

   
LED LIGHT ASSEMBLIES & IN-PIPE TUBE LIGHTS

  • SeaMaster® LED Light Assembly:  Oval with End Caps . . . Page E-14
  • SeaMaster® Round In-Pipe Tube Lights . . . Page E-15
  • Scandvik® T-Top LED Tube Lights . . . Page E-16

ENGINE ROOM LIGHTS & LED LIGHT BARS

  • Scandvik® Engine Room Lights . . . Page E-16
  • LED Light Bar:  100% Waterproof . . . Page E-17

FLUORESCENT LIGHTS & TUBES

  • Fluorescent Lights & Light Tubes . . . Page E-17

CUP HOLDERS

  • Cup Holder:  Aluminum Mount . . . Page E-18
  • Cup Holder:  Stainless Steel Mount . . . Page E-19

COMPONENTS FOR BOW RAILS & GRAB RAILS

  • Hardtop Bushings & Washers . . . Page E-20
  • Low Profile Bow Rail & Grab Rail Fittings (for 3/4" Nom Pipe) . . . Page E-21

  
ALUMINUM HANDLES & DECK LIGHT MOUNTS

  • Aluminum Handle with Finger Grips (Polished and Brite Dipped Clear Anodized) . . . Page E-21
  • Spot / Aft Deck Light Mount . . . Page E-22

LEANING POST PADS, FLAG STAFFS & LADDER STEPS

  • Leaning Post Pad . . . Page E-22
  • Flag Staff . . . Page E-23
  • Ladder Step:  Plastic . . . Page E-23

END CAPS

  • End Caps:  For Pipe & Oval Tubing . . . Page E-24

SUN SHADE TOWER QUICK PIVOT / REMOVAL ASSEMBLY

  • Sun Shade Tower Quick Pivot / Removal Assembly . . . Page E-25
  • Hard Top Pad Assembly . . . Page E-25

ANTENNA MOUNTS & CLAMP-ONS (PIPE & TUBING)

  • Antenna Mount:  Threaded . . . Page E-26
  • Clamp-On's Split (Lowest Profile) . . . Page E-26

MISCELLANEOUS

  • Tef-Gel® Anti-Seize Lubricant & Corrosion Eliminator . . . Page E-19
  • Paint for Anodized Extrusions . . . Page E-20
  • CNC Machining is our Specialty . . . Anything can be made to your specifications! . . . Page E-27

E-TEC MARINE® OUTRIGGER CHOICES
Sailfish™ Multi-Position Elbow . . . Page F-2
Wahoo™ Multi-Position Elbow . . . Page F-2
Wahoo™ Multi-Position Elbow Bolt-On . . . Page F-2
Sailfish™ Auto Model . . . Page F-2
Rigging Kits . . . Page F-2
Wahoo™ Auto Model . . . Page F-2

E-TEC MARINE® OUTRIGGER MODELS

  • Sailfish™ Outrigger:  Fixed Elbow . . . Page F-3
  • Sailfish™ Lay-Down Outrigger:  Multi-Position . . . Page F-4
  • Wahoo™ Outrigger System:  Bolt-On . . . Page F-5
  • Wahoo™ Outrigger Mounting Extrusion (Polished and Lite Brushed) . . . Page F-6
  • The Auto™ "Sailfish™" Outrigger System . . . Page F-7
  • The Auto™ Wahoo™ Outrigger System . . . Page F-8
  • Xtender™ Outrigger System . . . Page F-9

E-TEC MARINE® OUTRIGGER & CENTER RIGGER POLES

  • Telescoping Pole Assembly for Multi-Position and Auto Models (Sailfish™ and Wahoo™ Elbows) . . . Page F-10
  • Telescoping Outrigger Pole . . . Page F-11
  • Center Rigger:  Fixed Position . . . Page F-11

E-TEC MARINE® SAILFISH AND WAHOO OUTRIGGER RIGGING KITS (2 STYLES)

  • Econo Rigging Kit (Basic Kit) . . . Page F-12
  • Elite Rigging Kit . . . Page F-13

WAKE BOARD TOWER ACCESSORIES & EXTRUSIONS

  • Wake Board Tower Accessories . . . Page H-2
  • Pipe:  Standard Wall & Heavy Wall . . . Page H-3
  • Tubing:  Telescoping Applications . . . Page H-3
  • Oval:  All Sizes . . . Page H-3
  • Oval with Speak Mounting Areas . . . Page H-3
  • Custom Shapes . . . Page H-3

STANDARD & CUSTOM SHAPED EXTRUSIONS & PADS

  • Pads:  Round, Rectangular, Shaped, and Custom Pads . . . Page H-4

WAKE BOARD & SKI TOW ROPE MOUNTS

  • Ski Rope Mounts, Caps & Top Lights . . . Page H-5

PIVOT TYPE ASSEMBLIES & BREAKAWAY PINS

  • Pivot Type Assemblies . . . Page H-6
  • Pin - Breakaway's:  Fixed & Swivel Type (All sizes:  3/4" x 2" Pipe) . . . Page H-6
  • Swivel Pivot for 1-1/2" Sch. 40 Pipe . . . Page H-7
  • Pins & Pin Combinations (Locking & Non-Locking) - We can make custom parts for you . . . Pages H-8 thru H-9

Manufacturers We Carry